Toshiba Strata IPT User Manual page 111

Table 16: Feature Button Definitions (continued)
Button Definitions
Call Frwd
Call Forward-External – Press to forward Private or DID line calls to an external or
External
internal phone number.
Caller ID
Caller ID – Press to view the Call History list (may include name/number, date, status).
Directed
Call Pickup – Press to initiate a ringing Directed Call Pickup of outside line, extension,
Pickup
and page calls.
Do Not
Do Not Disturb – Press to lock your station in or out of the Do not Disturb
Disturb
mode.
Direct Station Selection(s) – Press to ring a preselected station. The LED
DSS
associated
with each DSS button provides the status (idle/busy) of the station assigned to the
button.
Flash – Press to perform the following functions: Disconnect and recall dial tone
Flash
on a outside line; access Centrex or PBX features; enter a pause or flash signal
when programming speed dial numbers.
Group Group Pickup – Press to pick up a call that is ringing a station that belongs to a
Pickup
Pickup Group that your station is a member of
Line Line – Press to answer or access an outside line.
Microphn
Microphone Cutoff – Press to turn the microphone off/on while idle, providing
Cut-off
privacy
when you receive handsfree internal calls. Also functional when your station
receives calls – The Mic button controls the microphone when you originate calls.
Msg Wait
Additional Messages Waiting
Night
Press to control the system's outside line ringing pattern for after-hours incoming
Transfer
calls.
Park in
Park — Press to park internal or outside calls in an orbit. Call retrieval can be
Orbit
made locally from the same parking featurephone or remotely from a different
featurephone.
Pooled Line
Pooled Line — Press to access an available outside line from a group of lines
Grp
appearing under one button.
Privacy on Privacy — Press to block Privacy Override on common outside line buttons. This
Line
button does not block Busy Override or Executive Override.
Privacy Privacy Release — Press to release privacy on common outside line buttons,
Release
enabling
release does not apply to common extension buttons which are always private.
Program
Program — Press to enter User Programming mode, which enables you to re-
define Flexible Buttons to perform other functions, including programming One
Touch and Flexible Buttons, register Call Forward assignments, assign Message
Waiting Keys and assign BGM sources played over the featurephone speaker.
PS/RES
Pause/Resume — Press to pause or resume recording a conversation to a voice
mailbox or when playing back the recording.
Record
Record to Voice Mail — Press to record current conversation to voice mailbox.
Release
Release and Answer — Press to disconnect or complete the transfer the current
and Ans
outside or extension call and automatically answer the new incoming outside or
extension call.
Release Release — Press to disconnect or complete the transfer of the current outside or
Call
extension call and to place your station in the idle condition.
SD or Speed Dial — Press to Speed Dial a phone number or feature access codes. SD
Customized
buttons can be used as either System Speed Dial numbers or Station Speed Dial
Button
numbers.
Spd Dial
Pause (Long) — Press to insert a 10-second pause when programming Speed
Lng Pause
Dial numbers.
Spd Dial
Pause — Press to set either a one-half or two-second pause when programming
Pause
Speed Dial numbers. (The pause time is set in system programming).
STRATA IPT/DKT FEATUREPHONE USER GUIDE
other station users to enter your conversations on those buttons. Privacy
Toshiba Business Communications Division
111 of 124