Handset; Answering A Call; Speaker; Handsfree Answerback - Toshiba Strata IPT User Manual

Handset

1. To make a call, lift the handset, then dial the number.
A line may be automatically selected or you can manually choose a line. Dial tone plays through the
handset. The Speaker and Microphone LEDs do not light.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone, etc.) are heard
through the handset.
2. When connected, you can continue to use the handset or switch to speakerphone by holding
Spkr
down and replacing the handset.

Answering a Call

There are several ways to answer a call:
Handset
If your featurephone is programmed for Ringing Line Preference, pick up the handset and the
featurephone automatically answers the ringing line.
If not, press the button associated with the ringing line (flashing green LED).

Speaker

If your featurephone is programmed for Ringing Line Preference, press
featurephone automatically answers the ringing line.
If not, press the button associated with the ringing line (flashing green LED). Once connected,
you can continue on the speakerphone or lift the handset.

Handsfree Answerback

If you have a speakerphone, it may be programmed for Handsfree Answerback. You hear a
single long tone, followed by the caller's voice. The extension LED flashes green (incoming call).
The Microphone LED lights steady red (microphone is active). The Speaker LED flashes red.
1. Do not lift the handset; speak toward the featurephone in a normal voice.
2. Press Spkr or take the handset off-hook before transferring the call or placing it on hold.

Switching Between Handset and Speakerphone

Spkr
Press and place the handset on-hook to switch from handset to speakerphone mode.
Take the handset off-hook to switch from speakerphone to handset mode.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
Toshiba Business Communications Division
Spkr
and the
26 of 124