Account Code Calls; Verified/Non-Verified Account Codes; Forced Account Codes - Toshiba Strata IPT User Manual

STRATA IPT/DKT FEATUREPHONE USER GUIDE

Account Code Calls

Account Codes (Forced or Voluntary) can be used for a variety of reasons including billing, tracking,
and line restriction applications. Account Codes are assigned in the system as a fixed length
(default is six digits) and are recorded by the system, along with the details of the calls, which can be
printed on a Station Message Detail Recording (SMDR) report.

Verified/Non-Verified Account Codes

If programmed for Verified Account Codes, the system checks the account code you entered
against a list created by the System Administrator. The code you enter must be on the list for the
call to proceed. Non-verified account codes must be of a uniform length specified by the System
Administrator.

Forced Account Codes

Some applications require you to enter an Account Code. These Forced Account Codes may be
verified or non-verified, depending upon the application, but in either case, the caller must enter a
code before proceeding.
To dial using Forced Account Codes
1. Place a call in the normal method.
If the call requires an Account Code, a burst of tone (Success Tone) is heard after dialling the
phone number alerting you to enter the Account Code.
2. Enter the account number.
When the number of digits designated for account codes has been entered, the number will be
checked against the verified list, if chosen, and the call will continue as normal. If the number of
digits entered for the account code is not reached or the verified code does not match, then re-order
tone is heard and the call is rejected.
You can bypass Forced Account Code requirements with three emergency numbers, including
9999. See your System Administrator for these numbers:
1) 999 2) _______ 3) _______
43 of 124
Toshiba Business Communications Division