Storing Personal Speed Dial Names - Toshiba Strata IPT User Manual

Storing Personal Speed Dial Names

You can store names with Personal Speed Dial numbers. These names will display as Soft Keys,
that can be used for dialling with the Personal SD directory on the IPT2008- SDL featurephone.
Note:
Speed Dial bins (locations) must be assigned to your IPT2008-SDL featurephone by your System
Administrator before you can store names. Your System Administrator can also associate names with Station
Speed Dial numbers.
To assign Station Speed Dial names
1. Enter User Programming Mode by dialling
Spdial
2. Press . "SPEED DIAL MODE" displays on the LCD.
3. Enter a Speed Dial location number (100~199, depending on system programming).
4. Enter the phone number to be stored. If you normally a dial line access code (such as 9)
and/or and area code, enter the codes before the phone number.
Spkr
5. Press , then input the name that will appear in the Personal SD directory (nine characters
max). You can enter alphanumeric characters from the dial pad (shown below and in
• To move one character to the right, press the RIGHT Soft Key. To add a space, press the RIGHT
Soft Key twice
• To backspace (delete previous character), press the LEFT Soft Key.
• To cycle back to the first letter, continue pressing the LEFT Soft Key.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
#9876 Program
or, press
Example:
Press the 2 for "A"
Press the 2 again for "B", etc.
Refer to the table for other characters.
Toshiba Business Communications Division
.
Table 11).
93 of 124