Making A Call Using Speed Dial; Accessing System Sd And Personal Sd Directories - Toshiba Strata IPT User Manual

Making a Call Using Speed Dial

There are two ways to begin a Speed Dial Call.
Spdial
1. Press on a Strata DKT3000-series digital featurephone
*
...or press the button on any featurephone.
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers occupy numbers
100~199. System Speed Dial numbers occupy numbers 200~999.
Table 5: Speed dial Access Codes
Feature
Speed Dial (Dialling an SD number)
Station 1
System 1
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
2. If your featurephone does not have a Spdial button, press the * button, then dial the three digit
Speed Dial bin number (nnn).

Accessing System SD and Personal SD Directories

Names can be assigned to System and Station (personal) Speed Dial numbers. These directories
appear on large screen Strata IPT2008F-SDL and Strata DKT3014 featurephones only.
To access the SD directories
1. Press the Soft Key next to SYSTEM SD or PERSONAL SD to view the first screen.
2. Press the MORE Soft Key to view following pages; press
3. To dial from the list, press the Soft Key next to the name. The system calls the number assigned
to the name and displays the dialed number.
4. To assign names to your Personal (Station) SD numbers, see
Names" on page 93.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
Feature Access Code Sequences
Spdial 2 + nnn
nnn=100~199 Station SD bin numbers
Spdial 2 + nnn
nnn=200~999 Station SD bin numbers
PREVIOUS
"Storing Personal Speed Dial
Toshiba Business Communications Division
to page back.
70 of 124