Call Answering (Outside Line); Speed Dial; Paging - Toshiba Strata IPT User Manual

Lcd featurephones
Hide thumbs Also See for Strata IPT:
Table of Contents

Advertisement

STRATA IPT/DKT FEATUREPHONE USER GUIDE
Call Transfer with Camp-on
You can transfer a call to a busy station from either a DSS console or an DADM. Use the DSS to
transfer the call, even though the DSS LED associated with the station you are "transferring to" is
red.
To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.
You may hear a busy tone. The original caller is placed automatically on hold. The Line or
extension LED flashes green at double the on-hold rate, and the DSS LED remains steady red.
2. Hang up.
The call rings the called station once with the camp-on tone. While the called station is receiving
this tone, the Line LED flashes green (on-hold rate) or if you are on a extension button, it goes idle.
The [DSS] LED remains steady red.
When the called station answers the transferred call, the Line LED becomes steady red. The [DSS]
LED remains steady red.
Note:
If the busy station is in the Do Not Disturb mode, the call will not transfer, but will recall your featurephone
immediately.
If the call is not answered after a specified Recall time set in system programming, camp-on is
cancelled and the transferred call rings back.

Call Answering (Outside Line)

If your DADM or DSS console is equipped with a Line button, you can answer outside line calls
from the DADM or DSS console as you would from a digital featurephone.
To answer an incoming outside line call to a DADM or DSS Console, press the flashing Line.

Speed Dial

Your DADM or DSS console may be equipped with SD (Speed Dial) buttons that can be
programmed to dial phone numbers or to access features. SD buttons on either the DADM or DSS
console function like SD buttons on digital featurephones.

Paging

You can make an announcement page to a group of featurephone speakers selected in system
All Call Page
SD
programming with
on the DSS console.
(if programmed) on either the DSS
console or the DADM can be used for page announcements. See
"All Call Page" on page
67.
107 of 124
Toshiba Business Communications Division

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents