Automatic Busy Redial - Toshiba Strata IPT User Manual

STRATA IPT/DKT FEATUREPHONE USER GUIDE

Automatic Busy Redial

After reaching a busy outside number, you can activate Automatic Busy Redial so that the system
automatically redials the number at regular intervals. The system repeats the redial until the
destination is no longer busy. This feature may not be on some featurephones on your system.
Automatic Busy Redial is not attempted while your station is busy, but continues to time-out. The
system inserts a pause (P) on your LCD before redialing the number.
To activate Automatic Busy Redial
1. When you reach a busy number, press Auto Busy Redial or Cnf/Trn + #441. The LED flashes
red. You hear confirmation tone.
2. Hang up or press Spkr. The system redials, up to five to 20 times, every 30 to 180 seconds
(depending on system programming). Your featurephone receives ring tone when Automatic Busy
Redial dials the number and it is available. The extension and Spkr LEDs flash green.
3. Lift the handset or press Spkr and wait for the party to answer. If you do not pick up the handset
or press Spkr within recall timeout (five to 60 seconds) after a connection is made, you hear a
muted ring for another 30 seconds, then the call disconnects.
To cancel Automatic Busy Redial
Press Auto Busy Redial or extension + #442.
45 of 124
Toshiba Business Communications Division