Tone/Pulse Dialing - Toshiba DKT3000 Series User Manual

Advanced Operation

Tone/Pulse Dialing

The numbers are defined in
Table 4 Dial String Characters
Entry
0~9
—(
End of Speed Dial Number when entering via access code (
Æ
Escape. "
represents something exceptional. When
one Speed Dial digit. Entering
characters.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
pause escape sequences. For example, to insert a 17-second pause, enter
à ×Ã(
display of a pause in the Speed Dial Number shows a "P" without specifying the duration. In
this example, you would see "PP."
Æ Æ
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls on outside lines
programmed for rotary dial pulses. This feature enables you, while on these lines, to
switch to tone dial to access remote equipment (such as an answering machine)
requiring touchtones.
Note With ISDN calls, when
after that point will be sent with touchtones.
➤
To change Tone Dialing
1. Access an outside line.
2. Dial a telephone number.
3. While on the call, press
programmed for rotary dial pulses, access the outside line and dial the telephone
number like any other call described in this user guide.
The Tone LED lights steady red and you are able to send touchtones with your dial
pad. The feature is cancelled when the call is completed.
54
Table 4:
" functions as an escape key indicating that the number immediately following
&
7RQH 'LDO 6HOHFW
7RQH 'LDO 6HOHFW
Meaning
is used as an escape character, it consumes
to insert a seven-second pause would use two of 32
is pressed, all of the digits entered
. Although the outside line is
Strata CTX DKT3000/2000-Series Telephone 10/02
Æ%%
. The
('