Toshiba Strata IPT User Manual page 103

CHAPTER 7 – ADM/DSS CONSOLE
This chapter provides an overview of the following two optional units and describes the features,
buttons and associated LEDs. It describes the various models for the following two types of units.
• Digital Add-on Module (DADM) – adds 20 line/feature buttons to digital featurephones. Up to
two DADMs can be connected to a featurephone.
• Direct Station Selection (DSS) Console – adds 60 line/feature buttons to a digital
featurephone. Available for system operators who do not have an operator console.
• IP Add-on Module (IADM) – adds 20 line/feature buttons to the IPTs. Up to two
IADMs can be connected to an IPT.
• IP Direct Station Selection (IDSS) Console – operates alongside an IP featurephone and has
60 line/feature buttons. Up to three consoles can operate with one IP featurephone.
Note
:
The Strata CTX can support up to two IADM2020, but it cannot support the IDSS2060.
ADM
Digital add-on Modules (DADM) can be connected to 3000- and IPT featurephones to provide
additional buttons. Certain models are not interchangeable.
The DADM3120 works with the Strata DKT3000-series featurephones and the IPT1020F-SD.
The DADM3020 works with 3000-series featurephones only
The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks similar and
has the same functions.
The IP add-on Module (IADM) offers all the same features of the DADM3120. IADM2020 works
with the IPT2000-series IP
STRATA IPT/DKT FEATUREPHONE USER GUIDE
featurephones.
Toshiba Business Communications Division
103 of 124