Alarm Notification Button; Automatic Busy Redial - Toshiba Strata CIX IP5000-Series User Manual

Alarm Notification Button

The Alarm Notification Button must be setup by your System Administrator on your
station.

When the Alarm Notification button displays

Call your System Administrator.
This button stops displaying when the alarm clears or when you press the flashing button.
If the alarm has not been cleared the Alarm Notification Button starts flashing every 10
minutes.

Automatic Busy Redial

After reaching a busy outside number, you can activate Automatic Busy Redial so that the
system automatically redials the number at regular intervals. The system repeats the
redial until the destination is no longer busy. Check with your System Administrator to
see if this feature is setup for your telephone.
Automatic Busy Redial is not attempted while your station is busy, but continues to time-
out. The system inserts a pause (P) on your LCD before redialling the number.

To activate Automatic Busy Redial
1. When you reach a busy number, press
LED flashes red. You hear confirmation tone.
2. Hang up or press
seconds (depending on system programming). Your telephone receives ring tone when
Automatic Busy Redial dials the number and it is available. The extension and Spkr
LEDs flash green.
3. Lift the handset or press
the handset or press
is made, you hear a muted ring for another 30 seconds, then the call disconnects.

To cancel Automatic Busy Redial
Auto Busy Redial

Press
Strata CIX IP5000-series Telephone User Guide
Auto Busy Redial
. The system redials, up to five to 20 times, every 30 to 180
and wait for the party to answer. If you do not pick up
within recall timeout (five to 60 seconds) after a connection
#442
or extension +
Feature Operations
Alarm Notification Button
or
.
#441
+ . The
49