Features
Account Code Calls
4. Press
system to dial the call
...or to enter a
subaddress, press ,
enter the subaddress,
then press .
Answering Calls
When your telephone
rings, lift the handset
and speak.
Account Code Calls
Account Codes are used for a variety of reasons, including billing, call tracking, and line
restriction applications. The system records the Account Codes and can print them with
other call details on a Station Message Detail Recording (SMDR) report.
Forced Account Codes
Some applications may require that you enter an Account Code, called a Forced Account
Code, before dialing a telephone number. Forced Account Codes can be recorded for
outgoing calls only.
To record a forced account code
1. Lift the handset.
2. Dial a CO line
number access code.
3. Enter the Forced
Account Code.
4. Dial the telephone
number.
4
to enable the
The internal ring pattern is one second ON, three seconds
OFF—for incoming outside calls.
You are connected to the calling party.
You hear dial tone.
See
Table 1 on Page
to require a forced Account Code in system programming.
You hear dial tone after you press the last digit of a valid
account code or busy tone after you press the last digit of
an invalid code.
38. The CO line accessed must be set
Strata DK Standard Telephone 5/00