4.3.3.2 Motion/Relay Out Link
•
Link a motion event from a camera channel to activate an Alarm out device.
[Motion In]
•
Select the Camera channel
[Relay Out]
•
Select the Alarm Out device number(s) to link with the camera motion.
[Dwell Time]
•
You can set how long the Alarm Out devices will stay activated. The value can be changed in 10 seconds
segments up to maximum of 300 seconds.
•
Set up continuous to keep Alarm Out put period.
4.3.3.3 System Error/Relay Out Link
•
Link a DVR error (options: HDD failure/Video loss) to activate an alarm out device.
[System Error]
•
Setup linking for three types of system error.
•
FAN/HDD : Alarms to be triggered when just FAN or HDD failure occurs.
•
FAN/Video Loss : Alarms to be triggered when FAN or video loss occurs.
•
FAN/HDD/Video Loss : Alarms to be triggered when the FAN fails, HDD fails and video loss occurs.
[Relay Out]
•
Select the Alarm Out device number(s) to link with the system error occurrence.
[Dwell Time]
•
You can set how long the Alarm Out devices will stay activated. The value can be changed in 10 seconds
segments up to maximum of 300 seconds.
•
Set up continuous to keep Alarm Out put period.
61
61