[Frame]
•
Select the number of frames to transmit through network. This will be the number of frames transmitted for
every one second.
[Apply All]
•
Click the [Apply All] button to apply the current camera setting to all camera.
4.2.3.4 Alarm REC Time
•
Set Pre-Alarm Time, Alarm REC Post Time, Instant REC Post Time, Instant REC Beep, and whether Auto
Deletion or not on instant recording.
[Pre-Alarm Time]
•
Setup Pre-Alarm recording start work-time.
[Alarm REC Post Time]
•
Setup Post Alarm (Alarm In, Motion detection) recording time.
[Instant REC Post Time]
•
Setup Instant Recording Time.
[Instant REC Beep]
•
Setup Beep sound working-time.
[Auto Deletion]
•
You can setup the storage period of the recoded data, where by the stored data will be automatically deleted
from the hard disk after the specified number of days has passed.
•
The default setup is [OFF].
56
56