Rack Installation - Kodicom KSR-916 User Manual

※ RacK installation

• Loosen the screws on both sides (4 screws on each side) and install
theBracket-Rack as shown in the figure, and then fasten the screws on
both sides (4 screws on each side).
•` Fix the screws not to be loosened by vibrations.
※ HDD Addation
• You can install additional HDDs.
• Make sure to unplug the power cord from the wall outlet to prevent possible electric shock,
injury or product damage.
• Please consult your provider for further information on HDD installation since improper
installation or settings may damage the product.
• Number of HDDs supported : Default 1 HDD + Up to 5 HDDs added
※ Cautions for data loss (HDD care)
• Please pay attention so that the data inside the HDD is not damaged.
• Before adding a HDD, please check the compatibility with this DVR product. HDD is
vulnerable to malfunction due to its sensitive nature against externalities or shocks during
operation. Please ensure that the HDD is free from such shock or externalities.
• We are not liable for any damage to the HDD incurred by user's carelessness or
externalities.
※ Cases might cause damage to HDD or recorded data
• To minimize the risk of data loss from a damaged HDD, please backup data as often as
possible.
• Data may be lost due to external impacts during disassembly or installation of the DVR.
HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during
operation.
• HDD or files stored inside may be damaged if the main body is moved or impacted during
the HDD operation.
※ Cautions when adding a hdd
• When adding a HDD, pay attention so that the cable does not get caught between
unsuitable spaces or the cable's insulation does not come off.
• Pay attention so as not to lose the disassembly screws or accessories.
• Please check the HDD compatibility before adding a HDD.
28 28