4.4.5 Emergency Notification
•
When an emergency Alarm in event has occurred, the Emergency Notification either delivers the
emergency message and video to the IP address with the CMS or transmits an e-mail.
•
Press the "CMS" button to set the Emergency Notification by CMS.
[Alarm In]
•
Sets the emergency notification to be transmitted to CMS when a selected alarm is triggered.
[Motion]
•
Sets the emergency notification to be transmitted to CMS when motion is detected on the selected
channel.
[CMS IP/Tel]
•
Enter the IP address that CMS is executed. The following input screen will appear if the "Enter" button is
pressed.
[Transfer Time]
•
Set the time that a emergency message is transmitted.
•
Transmit in a until of 30, 60, 90, 120 or 150 seconds.
[Start On]
•
To enable the Emergency Notification feature by Alarm In event, selected the "Alarm In" event field.
•
To enable the Emergency Notification feature by Motion event, selected the "Motion" event field.
•
To enable the Emergency Notification feature using the [Emergency] button on the front panel of the
system, select the "Emergency Button" event field.
70
70