Kodicom KSR-916 User Manual page 52

[Camera]
• Use the mouse wheel or the Jog/Shuttle to select the camera to change its schedule.
[Time]
• Change the recording time in hourly intervals
• Use the mouse to toggle the time or use the jog and shuttle dials on the front of the DVR
[REC Option]
• You can select a recording mode for the selected camera by using the mouse or directional keys to
highlight the type of recording you wish to set.
• Available recording modes are listed on the table below. You can set none recording as an option.
[24 Hour setting]
• This setting applies the recording type to a camera for the whole 24 hour period.
• Select the type of recording using the mouse or jog and shuttle to toggle between the settings.
[Apply All]
• Click the [Apply All] button to apply the current camera setting to all cameras.
Recording Mode
• C : Continuous Recording
• M : Motion Recording
• A : Alarm In Recording
• P : Pre-alarm Recording
Available Recording Mode
• No Recording
• Continuous Recording
• Motion Recording / Continuous Motion Recording
• Alarm In Recording / Continuous Alarm In Recording
• Motion & Sensor Recording
• Motion & Pre-alarm Recording
• Alarm In & Pre-alarm Recording
• Motion & Alarm In & Pre-alarm Recording
•Continuous & Motion & Sensor Recording
[Table. Recording modes]
52 52
Schedule Setup Display
NONE
C
M / CM
A / CA
MA
MP
AP
MAP
CMA