Table of Contents
Advertisement
[Camera Name]
•
The camera name of the selected channel can be set. A virtual keyboard appears if you press the Enter
button.
•
Characters can be input one by moving the cursor. You can input up to 10 characters. If you press [Shift],
you can input the uppercase letters and number keys.
[P/T/Z Model]
•
Lets you select P/T/Z on the selected camera channel.
[Ptz ID]
•
Select the PTZ ID(0~99).
[Baudrate]
•
Select the PTZ speed.(600/1200/2400/4800/9600/19200/38400/57600/115200/230400)
4.3.2 Alarm In Setting
•
Configure Alarm In type Normally Open and Normally Close setting and beep option.
[Alarm In]
•
Select the Alarm In number for configuration.
[Signal Type]
•
The Alarm In type can be set to "Normally Open", or "Normally Close".
•
NC(Normally Closed) = If the door/object with the Alarm In installed is not closed, the Alarm In will trigger.
•
NO(Normally Open) = If the door/object with the Alarm In installed is not opened, the Alarm In will trigger
[Beep]
•
When Alarm In are triggered, the system will produce "Beep" alarm sound through its internal speakers.
Select "ON" to enable alarm, and select "OFF" to disable it.
59
59
Advertisement
Table of Contents
