Table of Contents
Advertisement
4.5.2.2 OSD Dwell Time
•
Configure the setup of the on screen display (OSD) and the dwell time for the camera sequencing.
•
You can turn the display settings in Surveillance mode on or off, such as [OSD All], [Event Monitoring Duration],
[Camera Name], [Recording], [Audio], [P/T/Z], [Backup], [Data/Time], [HDD Space], [Dwell Time], [Transparency],
[Event Monitoring Trigger], [Live Exit Time] and [Bad Sector Dwell time] displays.
[OSD All]
•
Select [OSD All] to turn all screen displays using the mouse or jog and shuttle dial to switch on or all off.
[Event Monitoring Duration]
•
Select to display when a event happened in watch mode for linked camera during event time period.
[Camera Name]
•
Setup the camera name, camera in use or disabled.
[Audio]
•
Setup the audio, camera in use or disabled.
[Recording]
•
Setup the recording, camera in use or disabled.
[Backup]
•
Setup the audio, camera in use or disabled.
[P/T/Z]
•
Setup the recording, camera in use or disabled.
[HDD Space]
•Set whether to display HDD space on watch screen.
[Date/Time]
•
Set whether to display date/time on watch screen.
[Transparency]
•
Select [Transparency] to enable transparency function.
[Dwell Time]
•
You can set the channel sequence time from 1 second to 60 seconds by changing the value of [Dwell
Time] by using the mouse wheel or the jog/shuttle dial.
[Motion Detected Zone]
•
Set the time that the DVR automatically returns to the Live screen when left idol in another menu.
[Bad Sector Dwell Time]
•You can set on the watch screen the display time that the bad sector icon shows when Bad sector happens.
80
80
Advertisement
Table of Contents
