Table of Contents
Advertisement
1.2 Viewer main screen
2
1
[Scroll button for camera]
1
•
Scroll up or down to show camera buttons.
[Camera]
2
•
Select camera number(s) you wish to search.
[Time indication bar]
3
•
It indicates time of stored data.
•
To enlarge the time scale, click on the time
indication bar.
[Indication of stored data]
4
•
This function indicates recording type and stored
data in graphical colour form as below ;
- Pink bar indicates 'Continuous recording',
- Blue bar indicates 'Motion recording',
- Dark Yellow bar indicates 'Sensor recording',
- Green bar indicates 'Pre-alarm recording',
- No graphic bar where nothing was recorded.
3
4
5
[Search Line]
5
•
This indicates time line for searching data.
•
Move the line to the left or right to start searching.
6
[Split Screen setup]
•
screen will automatically change according to the number
of cameras you choose in a form of 4, 9, or 16 split screen.
7
[SKIP]
•
Move the slides to the right if you wish to increase
search speed.
•
The number of images to be skipped are set by an
internal value of the KSR Center software. The value is
not the number of images to be skipped.
[SPEED]
8
•
Move the slides to the right to increase the speed of
replaying saved image.
113
113
6
7
8
When you click the button, split mode from search
Advertisement
Table of Contents
