Alarm-Out Connection - Kodicom ND-1016 User Manual

1.5 Alarm - Out Connection
1.5 Alarm - Out Connection
DVR System can turn on/off alarm device as like a siren, a light .
Alarm device can connect to alarm output and COM terminals. Each alarm output
terminal can be setup as NC (Normal Close) or NO (Normal Open) in System
Configuration.
Control Connection Method
1. Connect Signal line of Alarm Device with Alarm Output terminal number.
2. Connect another Signal line with COM terminal.
[Note]
☞ ☞
• Connect any alarm device with the alarm output. When event occurs in alarm input
the connect alarm output will initiate the alarm device by a mechanical reply
completing the circuit.
19
19