[Time]
•
If the [Time] button is pressed, the following screen appears.
•
Select [Time] to change time to view log information recorded on different date/time.
•
Change [Start Time] and [End Time] using the mouse and mouse wheel or the directional keys and the
jog/shuttle, then press [OK] button. The system will display the log information recorded during this period.
[REC]
•
Displays the recording information according to the recording event and schedule.
[System]
•
Displays the system start/stop, system access user and setup change information.
[Failure]
•
Displays the error information that occurs due to the hardware failure.
[Search]
•
Displays the time information between the entry and exit of the search mode.
[Network]
•
Displays the time and IP address for the connected system through the remote software.
[Backup]
•
Displays the backup information.
96
96