1. Manuals
  2. Brands
  3. Kodicom Manuals
  4. DVR
  5. KSR816
  6. User manual

Kodicom KSR816 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
K K S S R R 8 8 1 1 6 6 M M a a n n u u a a l l
•This manual is published by KODICOM Co, Ltd and contains information on KSR816 which
will enable you to use this product properly.
• If you require additional copies of this manual, please print the manual contained in the CD
provided with your purchase.

Advertisement

Table of Contents
loading

Related Manuals for Kodicom KSR816

Summary of Contents for Kodicom KSR816

  • Page 1 K K S S R R 8 8 1 1 6 6 M M a a n n u u a a l l •This manual is published by KODICOM Co, Ltd and contains information on KSR816 which will enable you to use this product properly.
  • Page 2 This DVR is produced by the most advanced KODICOM technology and its quality is guaranteed by strict reliability and compatibility testing. This KSR816 manual provides necessary information for the correct use of this product and also contains some useful tips.
  • Page 3 KODICOM reserves the right to change the contents of this manual without notice. • KODICOM can not be held responsible if the DVR is damaged due to the product being disassembled or modified by the user.
  • Page 4 Warning and Caution signs If you are not aware of this If you are not aware of this • Avoid positioning the KSR816 in any place where the unit may come into contact warning, you may be seriously caution, you may be injured with moisture, dust, or soot.
  • Page 5 �This may cause an explosion. new one. Ask for an engineer’s assist ance for HDD replacement from your dealer. � KODICOM is not responsible for deleted data caused by user’s mishandling. Check for any danger signs such as moist Install the system on a plain surface with floor, loosened or damaged power cable, sufficient air ventilation.
  • Page 6 �The system may not operate properly. •KODICOM is not held responsible for the back of the system and a wall, and at least 5cm distance between the side •System breakdown may be cause by system breakdown caused by user’s...
  • Page 7 Equipment Do not overturn the product under use. Power Set up Please check to make sure the following equipment are included when you purchased KSR816. If any Connect with AC115V if AC items are missing, contact your dealer. selector is as left picture.

  • Page 8: Table Of Contents

    C C o o n n t t e e n n t t s s C C o o n n t t e e n n t t s s 5.3.2 Selecting cameras and changing graph bar line ……………………23 Chapter 1. KSR816 Guide 5.3.3 Audio Output ………………………………………………………………24 1. System Overview 5.3.4 Playback ……………………………………………………………………25...
  • Page 9 7.7.1 Adding Backup schedule ………………………………………………74 Appendix 7.7.2 Deleting Backup schedule ………………………………………………80 1. Viewer for KDB data 8. Controls - Manual Control 2. Specifications 8.1 Switching to Control Mode …………………………………………………81 3. FAQ 4. Product Warranty Chapter 2. KSR816 Installation 1. Pan/Tilt Connection...

  • Page 10: Chapter 1. Ksr816 Guide

    1. KSR816 Guide 1. System Overview 2. Surveillance mode 3. Menu Operation 4. Pan/Tilt Camera 5. Search 6. Backup 7. System Setup 8. Controls - Manual Control...

  • Page 11: Front Panel

    1. KSR816 Guide 1. System Overview 1. System Overview 1.1 Front Panel The following describes the keys and ports on the front of the system and their functions : 1 2 1 3 1 4 [Figure 1-1. System front view] mode, forward or backwards.
  • Page 12 1. KSR816 Guide 1. KSR816 Guide 1. System Overview 1. System Overview ⑥ [Auto] ⑨ [Split screen buttons] ⑬ [CD-RW Open] • Press to begin automatic channel • On Surveillance or Search modes, press • Press button to open CD-RW.

  • Page 13: Rear Panel

    The following describes keys and ports on the rear part of the system and their functions. • You can update your system software with an upgrade package through the USB port. • A standard HP PostScript computer printer can be connected to USB port of KSR816 to print out any still image.
  • Page 14 1. KSR816 Guide 1. KSR816 Guide 1. System Overview 1. System Overview ④ [Loop Through Output] “7.5.5 Spot Out/Camera Link.” ) ⑫ [RS-485 Output Port for P/T/Z Control] •Video output ports for camera loop • RS-422/RS-485 output for controlling P/T/Z cameras.

  • Page 15: Description Of The Remote Controller

    1. KSR816 Guide 1. KSR816 Guide 1. System Overview 1. System Overview 1.3 Description of the Remote Controller The following describes the remote controller buttons, which have the same functions as the buttons on the front • Applicable Wheel Mouse List.

  • Page 16: Surveillance Mode

    1. KSR816 Guide 1. KSR816 Guide 2. Surveillance Mode 2. Surveillance Mode 2. Surveillance Mode 2.1 Screen Layout 2.2 Enabling full screen and sequence modes [To Select Full Screen mode] •Press any key 1~16 on the system to enlarge that camera channel and view in full screen.

  • Page 17: Menu Operation

    1. KSR816 Guide 1. KSR816 Guide 3. Menu Operation 3. Menu Operation 3. Menu Operation 3.1 Using menu in live mode 3.2 Using menu on PAN/TILT mode Pop-up menu appears when you click right mouse button on surveillance, search or...

  • Page 18: Using Menu On Playback Mode

    1. KSR816 Guide 1. KSR816 Guide 3. Menu Operation 4. Pan/Tilt Camera 4. Pan/Tilt Camera 3.3 Using menu on playback mode 4.1 Switching to Pan/Tilt control mode This menu appears only when you click right mouse button while playing back recorded images.

  • Page 19: Pan/Tilt Camera Control

    1. KSR816 Guide 1. KSR816 Guide 4. Pan/Tilt Camera 4. Pan/Tilt Camera 4.2 Pan/Tilt Camera Control 4.3 Supported Pan/Tilt Camera List Manual In P/T/Z menu, you can switch the P/T/Z camera controls to manual control, as Manufacturer Model Name Speed...

  • Page 20: Search

    1. KSR816 Guide 1. KSR816 Guide 5. Search 5. Search 5.1 Accessing Search Mode 5.2.1 Graph color display To access Search mode, press Search button on the system. You will then be asked to enter password as shown below : �Recorded data shown on the time graph will...

  • Page 21: Selecting Date And Time

    1. KSR816 Guide 1. KSR816 Guide 5. Search 5. Search 5.3 Selecting date and time 5.3.1 Selecting date � To select the date you wish to view, use the �After selecting the date you wish to view, Color Description Example...

  • Page 22: Audio Output

    1. KSR816 Guide 1. KSR816 Guide 5. Search 5. Search 5.3.3 Audio Output 5.3.4 Playback �Select the date (year, month, day, [Audio] and time) and camera number and �The system can play the video with any click the [OK] button.

  • Page 23: Backup

    IEEE1394, CD-RW, USB HDD, or a portable hard drive such as USB memory stick. [Replay Direction and Speed] Move to the very beginning of the date’ srecording The backup files can be saved as AVI, BMP, JPEG, or KDB (KODICOM Data Base) formats. � To go back to previous images, press the [<] Reverse Play button.

  • Page 24: Video Backup

    DivX Codec installed, please use the Internet resources to download the required Codec. �KDB(Kodicom Data Base) backup enables to backup of the video with audio data. However, the other types of backup such as AVI, BMP, JPG do not include audio.
  • Page 25 1. KSR816 Guide 1. KSR816 Guide 6. Backup 6. Backup [Storage space shortage] �When the storage space for USB HDD or memory, CD-RW is running short, a warning message will be shown as left. �A window will appear to ask whether to change backup media or not.

  • Page 26: Saving Backup Using Remote Drive

    ① [Backup mode – Video] �To select KDB (KODICOM data base) or AVI backup mode, use the mouse or the directional keys on the system to highlight [Backup mode], then use the mouse wheel or the jog/shuttle to select the option.

  • Page 27: Printing Still Image

    1. KSR816 Guide 1. KSR816 Guide 6. Backup 6. Backup 6.3 Printing Still Image �It is possible to print out the recorded image using the printer that supports PostScript. Choose the camera to print out while playing back the recorded and press [OK].

  • Page 28: System Setup

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7. System Setup 7.1 Accessing Setup mode To access Setup mode, press Setup button on the system. You will then be asked to enter password as shown below:...

  • Page 29: System Setup

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.3 System Setup 7.3.1 Password 7.3.2 Site Information �Select [Password] in system Setup menu to �In [Site Information], you can change change password. the [Site Code], [Date Type], and [Time Setup] options.

  • Page 30: Software Upgrade

    [Package Select] �You can upgrade the system program [Figure 7-10. Software Upgrade] by using a portable storage device to be recognized by KSR816. The upgrade [Date Type] package must be in a folder called �You can change the date display format.

  • Page 31: Log Information

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.3.4 Log Information [Time] �In [Log Information] menu, you can view �Select [Time] to change time to view log the log information on Setup history, information recorded on different date/time.

  • Page 32: Osd/Dwell Time

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.3.5 OSD/Dwell Time [Network] �You can change the options on OSD-On �Whenever the system is connected through Screen Display-and sequence time network by remote Center program, the function.

  • Page 33: System Management

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.3.6 System Management �Use the [Manage System] menu to check the �네트워크 상태를 체크하거나 DDNS 인증을 재시 network status, authenticate the Dynamic DNS (DDNS), 작할 경우“Network Management”선택 후 [OK] 버...
  • Page 34 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup �시스템 오디오 볼륨크기를 조절하거나 음소거 � DDNS 서 비 스 를 사 용 할 경 우 “ DDNS 시킬 경우 “A u d i o S e t t i n g” 선택 후 [ O K ] 버튼을 클...
  • Page 35 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup �영상 입력 방식을 확인할 경우“Video-In Type” �영상이 유실 되었을 때 경고음 설정을 하거나 영 상 데 이 터 에 워 터 마 크 를 설 정 할 경 우...
  • Page 36 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup �DVR과 리모컨의 통신을 위해 고유한 시스템 ID �To set the function of the external storage to be 를 설정할 경우“System ID”선택 후 [OK] 버튼을 connected to the DVR, i.e., backup device or recording 클릭합니다.
  • Page 37 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup �시스템에 장착된 HDD 디스크를 초기화 시킬 경 �The system will display a warning message. 우“HDD Mangement”선택 후 [OK] 버튼을 클릭합 To confirm and proceed with formatting the 니다.

  • Page 38: System Shutdown

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.3.7 System Shutdown �In [System Shutdown] menu, you can [Add schedule] safely shutdown, restart or schedule a �You can set the time and the system will reboot of the system.

  • Page 39: Recording Setup

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.4 Recording Setup 7.4.1 Recording Setup 7.4.2 Motion Detection �In [Recording] setup menu, you can �In [Motion Detection] menu, you can set motion change the color, brightness, contrast, and...

  • Page 40: Motion Link Setting

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.4.3 Motion Link Setting 7.4.4 Schedule [Motion link setting] �In [Schedule] menu, you can set �You can set a motion-link recording for each camera. automatic schedule for each camera and �When the camera detects movement in the motion-detection area, the linked camera will...

  • Page 41: Quality/Resolution

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.5 Camera Setup 7.4.5 Quality/Resolution �In [Camera] setup menu, you can setup Pan/Tilt mode and change the connection setting between sensors and controls. �In [Quality/Resolution] menu, you can...

  • Page 42: Sensor Setting

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.5.1 Channel Setting 7.5.2 Sensor setting �[채널 설정] 메뉴는 카메라의 사용유무와 카메 �In [Sensor setting] menu, you can select a 라 이름, 선택한 카메라 채널에 대한 PTZ 모델...

  • Page 43: Sensor/Control Link

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.5.3 Sensor/Control link 7.5.4 Sensor/Camera Link �In [Sensor/Control link] menu, you can �In [Sensor/Camera Link] menu, you can link a sensor with controls and set control link cameras to Sensors.

  • Page 44: Network Setup

    �Logging in ADSL require ID / PASSWORD. �Spot-out 5는 무조건 16분할 화면으로 Spot [Figure 7-65. Spot/Camera link setup] 모니터에 출력합니다. [ S i t e I P ] �Enter the system’s IP address for connecting KSR816 to a remote Center via LAN(see page 66 for details.)
  • Page 45 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup �When sensor signals are generated during an emergency, corresponding images are sent to the remote location where the center program is installed using the Emergency Warning feature. [ID/Password setup] To use the Emergency Warning function, set the network address of the center, transmission time, and interworking �When using ADSL or VDSL network, you...
  • Page 46 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup �비상시 메일 주소로 긴급 통보하기 위해 SMTP 주소, 송신자 및 수신자 메일 주소, 전송시간, 연동 이벤트 [Center IP/Tel Input Screen] 를 설정해야 합니다. � Input the IP address or telephone number of the center...
  • Page 47 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup [Input a New Mail Address] [Input Sender’ s Mail Address] �Input a new mail address. �Input the mail sender’ s address using the mouse or �Input a new mail address using the mouse or directional...
  • Page 48 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup [SMTP Mail Server Address Input Screen] [SMTP Mail Server Password Input Screen] �SInput the SMTP mail server address for the composed �Input the mail account password of the SMTP server.

  • Page 49: Backup Schedule

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup 7.7 Backup Schedule 7.7.1 Adding Backup schedule �In [Backup Schedule] menu, you can set �To add a backup schedule to the list, select up a system backup schedule so that the [Add] button.
  • Page 50 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup [Start Time / End Time] [Target Drive – Remote Drive] �Use the mouse wheel or the jog/shuttle to �To select [Start Time] and [End Time], use select Remote Drive.
  • Page 51 1. KSR816 Guide 1. KSR816 Guide 7. System Setup 7. System Setup [Connecting] [Backup Schedule List] �Press the [Connect] button to connect the �You will see the added schedule on the system to the receiving PC or fileserver in Backup Schedule list. Select [OK] button to order to save a remote drive backup.

  • Page 52: Deleting Backup Schedule

    1. KSR816 Guide 1. KSR816 Guide 7. System Setup 8. Controls – Manual Control 8. Controls – Manual Control 8.1 Switching to Control Mode 7.7.2 Deleting Backup Schedule If you wish to use the control devices manually, select the 16-splitscreen mode in Surveillance �To delete a schedule from the list, select...

  • Page 53: Chapter 2. Ksr816 Installation

    2. KSR816 Installation 1. Pan/Tilt Connection 2. Connecting LAN/PSTN Communication Lines 3. RX Receiver (KRE-303) Connection Diagram (optional) 4. External Sensor Connection (Input) 5. Control Port Connection (Output) 6. Adding HDD 7. HDD Smart Check 8. 외 외 부 부 저 저 장 장 장 장 치 치 설 설 정 정...
  • Page 54 (Used for connecting RX-Receiver) [Caution] �Please beware of (+ve) and (-ve) poles of the signal cable when connecting. A Wrong connection may cause malfunction to the system. �If you wish to use an RX-receiver not manufactured by KODICOM, please contact your dealer beforehand.
  • Page 55 2. Connecting LAN/PSTN Communication Lines 2. Connecting LAN/PSTN Communication Lines 2. Connecting LAN/PSTN Communication Lines 2.2 PSTN (telephone line) Connection (options) (Not available Europe) 2.1 LAN and Dedicated Line Connection (Use for connecting to KSR816 UDP Port) Center PC Modem (KSR816 RS-232 connection) Router Internet Network &...
  • Page 56 2. KSR816 DVR Installation 2. KSR816 DVR Installation 3.RX Receiver Connection Diagram 3.RX Receiver Connection Diagram 3. RX Receiver (KRE-303) Connection Diagram (optional) 3.1 Part Name and Description 1 . Turns “ON” when polarity of data lines connected correctly. 2 . Used for ON-OFF of the cross resistance according to the international standard, EIA-485.
  • Page 57 2. KSR816 DVR Installation 2. KSR816 DVR Installation 4. External Sensor Connection (Input) 5. Control Port Connection (Output) 4. External Sensor Connection (Input) 5. Control Port Connection (Output) CONTROL 1 2 3 4 COM SENSOR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 COM...

  • Page 58: Installing New Hdd

    2. KSR816 DVR Installation 2. KSR816 DVR Installation 6. Adding HDD 6. Adding HDD 6. Adding HDD 6.1 Installing new HDD 6.2 Checking HDD Database �Turn the system off and install the new HDD �If the newly installed HDD database does not into the system.

  • Page 59: Hdd Smart Check

    2. KSR816 DVR Installation 2. KSR816 DVR Installation 7. HDD Smart Check 7.외 외 부 부 저 저 장 장 장 장 치 치 설 설 정 정 7. HDD Smart Check 8. 외부저장장치 설정 7.1 HDD Smart Check This is a function to notify the user possibilities of HDD crash in advance.

  • Page 60: Appendix

    A ppendix 1. Viewer for KDB data 2. Specification 3. FAQ 4. Product warranty...
  • Page 61 1.1 How to run Viewer ① When you insert the CD containing KDB (Kodicom Data Base) data in CD-RW, it will start by autorun. If you do not have autorun on your PC, you can access the viewer file by double clicking the Viewer folder.
  • Page 62 �The number of images to be skipped are set by ratio. stored data in graphical colour form as below ; ⑫ [Backup] an internal value of the KSR816 software. The Pink bar indicates 'Continuous Recording', [Move] value is not the number of images to be...
  • Page 63 KSR816 : NTSC( Max 480 Frame/Sec), PAL (Max 400 Frame/Sec) • • Select KSR816 which contains backup data, then select the site you wish to search and click ‘Search’ to start. ▶ Audio Recording 16 Channel Audio Support •...
  • Page 64 ☞ Check to make sure the monitor is turned on. drive through network ☞ Check if the video output cable of KSR816 DVR is properly connected to the monitor. ☞ Unplug the power cable and plug in again. ▶ Power : ☞...
  • Page 65 � ☞ Check if the video cable connecting the camera and KSR816 DVR is cut, cross-wired, or Service fee and replacement parts will be charged in below cases: shorted.

Table of Contents