Table of Contents
Advertisement
[Motion Camera]
•
Select the camera that will detect the movement in its motion-detection area by using the mouse
wheel or the jog/shuttle on the system.
[Link Camera]
•
Select the cameras that will be linked to the [Motion Camera] by using the mouse or the
directional keys. You can link multiple cameras to the selected [Motion Camera].
[Camera]
•
Use the jog/shuttle on the system to select other cameras for set up.
[Full Motion]
•
To set the whole channel screen to motion-detection area, switch the [Full Motion] option to "ON". To
cancel the whole screen from motion-detection area, switch the option to "OFF".
[Sensitivity]
•
You can set the motion-detection sensitivity of each camera to "LOWEST, LOWER, LOW, NORMAL,
HIGH, HIGHER, HIGHEST.
[Beep]
•
To hear a 'beep' warning sound when the system detects movement in motion-detection area, set the
[Beep] option to "ON". To hear no warning sound, set the option to "OFF"
[Apply All]
•
Click the [Apply All] button to apply the current camera setting to all cameras.
50
50
Advertisement
Table of Contents
