4.5.6.3 POS Configuration
•
Connect the POS device to the DVR's RS-232 port to display and record the POS information.
[POS Enable]
•
Check "POS Enable" button.
[POS ID]
•
Only one camera can connect for each POS ID.
•
You can use the multi POS using the VSI-PRO.
[Linked Camera]
•
Select the cameras that will be linked to the POS.
[POS Mode l(Data Format)]
•
Select the POS model.
[BAUDRATE]
•
Select the BAUDRATE. The default setup is "9600".
[Live Display]
•
Select the level of live display.
•
Press the "Live Display DN" button to begin pos information in full screen mode.
[Live Display Dwell Time]
•
The value can be changed in 3 seconds segments up to maximum of 60 seconds.
•
Set up continuous to keep live display dwell time put period.
94
94