Pstn/Isdn(In Case Of Not Using Router) Setting Up Ppp - Kodicom DigiNet Center User Manual

PPP setup for PSTN/ISDN without router
PPP setup for PSTN/ISDN without router
1 [PPP setup using KPPPSetup.exe]
• To setup PSTN a modem should be installed in
Windows.
• After you finish the installation of modem, click
KPPPSetup.exe in DigiNet folder of DVR and PC.
Then PPP setup for PSTN/ISDN will be done
automatically.
[Requirements before installation]
2
• In order to use KPPPSetup.exe DVR or PC may
ask you to put in the Windows98 Second Edition
CD-ROM or the folder that has Windows98 SE.
• This program may not work properly when the
system doesn't have a modem installed. Execute
KPPPSetup.exe after finishing installation of a
modem on the system.
PSTN, ISDN setup on Windows98
3 [
• Install a modem for PSTN connection, or ISDN
Terminal Adapter for ISDN.
• Execute KPPPSetup.exe.
• You need to reboot the system when the PPP
setup is done.
• After rebooting, please check out the connection
between DigiNet and center PC by using center
and site program.
4
[Following items will be installed when you execute
KPPPSetup.exe]
• Dial-up networking
• Dial-up server
• Phone dialer
• TCP/IP Protocol
• Change Dial-up server properties
☞ [Tip]
The system may request you WIndows98 SE
CD on the CD-Rom drive or HDD. If it does,
assign the location that has WIndows98 SE or
CD-ROM drive.
]