Table of Contents
Advertisement
9. Changing the application mode*
('FM', 'SoundField', 'SoundField + FM')
With inspiro Premium transmitters running firmware
version 3.0 or higher, the application mode can be
changed directly on the inspiro.
To change the application mode, switch inspiro ON.
When the battery symbol appears, press "OK" and the
left soft key (C) simultaneously (shown below), then
press "OK" (D) again.
06.07.10
(C)
Vol Down
Select the application mode required
* applicable to inspiro Premium only!
01:57pm
Vol Up
06.07.10
01:57pm
(D)
Vol Down
Vol Up
45
Advertisement
Table of Contents
