Changing The Fm Channel - Phonak SmartLink+ User Manual

Changing the FM channel

Channel changing is recommended if the channel being
used is experiencing interference, or if other users are using
the same FM channel nearby.
J Press the + and
together. The channel indicator
on the display will begin flashing.
J Press + to move up a channel or – to move down
a channel.
SmartLink+ resumes normal mode 10 seconds after the last key
press. The channel indicator stops flashing and the FM receivers
are synchronized. Make sure that SmartLink+ is within 8 inches
(20cm) of the FM receivers – otherwise these receivers may not
be synchronized.
keys
F
Channel indicator
33
35