Colored Rings; Dynamic Datalogging Fm; Programming - Phonak inspiro Premium User Manual

Transmitters
Hide thumbs Also See for inspiro Premium:
Table of Contents

Advertisement

14.4 Colored rings

With the red, blue and green rings it is
possible to personalize your DynaMic
for quick identification.
You may use only 2 rings on one DynaMic. Do not place
these rings over the grill openings of the microphone's cap.

14.5 DynaMic DataLogging FM

DynaMic automatically logs its usage times. This information
is saved every 15 minutes. The first log entry is stored after
using DynaMic for 15 minutes. The usage data log contains
information such as the device's name, timestamp, MTN
mode etc.
DynaMic can store up to 800 data logs, covering approx. 20 days
of usage.

14.6 Programming

Programming is optional. The frequency is automatically
selected by the initiating inspiro in the MultiTalker Network.
The following parameters can be programmed using FM
SuccessWare 4.3 software or higher:
J Name, school and date
J Firmware updates
J Reading and erasing logged data
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

DynamicInspiro premium dynamic

Table of Contents