Synchronizing Receivers - Phonak inspiro Premium User Manual

6. Using inspiro

6.5 Synchronizing receivers

If you change the channel of the inspiro transmitter, you
should always make sure that the channel of the receivers is
synchronized to the new inspiro channel. In order to synchronize
the receivers, the inspiro needs to be close to the receivers (at
a distance of approximately 20 cm / 8 inches).
J Follow the instructions shown on the inspiro, for example
if you change the inspiro channel or if you activate the
Channel Finder.
J In the top screen, you can have direct access to the
synchronization feature by pressing the right soft key
labeled "Sync" (default settings).
01.10.2008 01:57pm
H33
Judy Smith
Monitor Sync
J The Monitoring feature (see page 25) also checks whether
the receivers are on the same channel as the inspiro.
32
01.10.2008 01:57pm
H33
Judy Smith
Monitor Sync