Table of Contents
Advertisement
If you switch OFF one DynaMic, it will be deleted from your
participants list. The MultiTalker Network will continue with
all other DynaMic and inspiro transmitters.
Should you unintentionally move outside the range of the
MultiTalker Network, you will be alerted by an alarm. You can
then choose to either return inside the network's operating range
(i. e. within 20 m / 65 feet of the initiating inspiro), or leave the
network.
15.5 Practical tips
J The MultiTalker Network setting is stored in the inspiro
transmitters. If the inspiro and DynaMic transmitters have
been switched OFF in MultiTalker Network mode, e. g. before
lunch, when switched back ON again after lunch MultiTalker
Network mode can be selected by simply turning on inspiro and
pressing Continue. In this case, there is no need to re-initiate
the network. All the DynaMic transmitters will join the network
after the 8 seconds pairing window.
J If you have set up a MultiTalker Network with, for instance,
two inspiro transmitters and a third person then needs to
join the network with inspiro or DynaMic, you must initiate
a new MultiTalker Network.
J inspiro and Dynamic transmitters joining a network
automatically use the FM channel of the initiating inspiro
in the MultiTalker Network.
59
Advertisement
Table of Contents
