Table of Contents
Advertisement
J Find channel
Finds a new, clean FM channel. All of the channels available in
the inspiro are first checked and then the inspiro proposes the
best channel for use. Follow the instructions in the inspiro!
J Sync receivers
Changes the FM channel on the receiver to the current
inspiro channel. The receiver must be within arm's length.
Beeping sounds confirm that synchronization is complete.
8.2 Receiver options
J Monitor
This performs a wireless check on the receivers. The inspiro
should be kept close to the receivers. The receivers must be
connected to a hearing device and the hearing device must
be switched ON. A beeping sound marks the end of the check.
Monitoring works only with Phonak Dynamic FM receivers.
J Set beep tone
Choose between the different beeping tones available to
indicate when the Dynamic FM receivers are being
synchronized or monitored.
J Lock push button
Locks or enables the push button on the universal MLxi
receiver.
39
Advertisement
Table of Contents
