Calf Strap; Detaching The Legrests; Attaching The Legrests; Adjusting The Height Of The Foot Plate - Ortopedia TOURING 926 Operating Manual

5.5.1 Calf strap

The calf strap is wrapped around the
left and right legrest and secured with
Velcro fasteners (Fig. 56/ ). The calf
strap is detached by opening the Velcro
fastener.

5.5.2 Detaching the legrests

Pull down the locking knob (Fig. 57/
and then pull off the legrest.

5.5.3 Attaching the legrests

Insert the mount of each legrest into the
respective tube until it latches (Fig. 58).
– Check for the correct functioning of
the locking device!
5.5.4 Adjusting the height of
the foot plate
Hold the foot plate and then unscrew
the clamping screw (Fig. 60/
about ½ a turn.
Move the foot plate to the desired height
and then tighten the clamping screw.
Attention:
!
The marking shows the maximum
extension.
36
1
)
56
2
57
) by
58
2
60

5.5.5 Height-adjustable legrests

774-2 and 774-2 AL-E
5.5.5.1 Detaching the legrests
Pull down the locking knob (Fig. 60/
and then pull off the legrest.
The contacts will separate automatically.

5.5.5.2 Hanging in the legrests

Insert the mount of each legrest into the
respective tube until it latches (Fig. 61).
The contacts will make automatically. –
Check for the correct functioning of the
locking device!
5.5.5.3 Adjusting the height of
the foot plate
Hold the foot plate and then unscrew
the clamping screw (Fig. 62/
about ½ a turn.
Move the foot plate to the desired height
and then tighten the clamping screw.
Attention:
!
The marking (crease) shows the
maximum extension.
)
1
60
61
) by
62
2
37