Table of Contents
Advertisement
Height adjustment of the calf
plates
Tools:
1 x hexagonal stud wrench WW* 5
The calf plate can be adjusted in height
after loosening the clamping screw
(fig. 21/
).
Retighten the clamping screw (fig. 21/
) after the adjustment.
Depth adjustment of the calf
plates
The depth adjustment is effected by
displacing the attachment screws (fig.
22/
).
Retighten the clamping screw (fig. 22/
) after the adjustment.
Adjusting the distance of the
calf plates
(Option)
The distance of the calf plates can be
changed by one position after screw-
ing out the attachment screws (fig. 23/
).
Replace and tighten the attachment
screws (fig. 23/
tioning the calf plate.
*WW = Wrench width [mm]
) again after reposi-
21
2
22
23
1
3
25
Advertisement
Table of Contents
