Selecting The Push Mode; Selecting The Drive Mode - Ortopedia TOURING 926 Operating Manual

4.3.1 Selecting the push mode

Switch off the control box because the
pushing will otherwise be made difficult
by the electric system.
1. Turn the selection lever for the steer-
ing in a clockwise direction to the push
mode position (Fig. 6/ ).
2. Press down the selection lever to un-
lock the locking mechanism and then
move the selection lever to the rear
(Fig. 8).
14
3
6
8

4.3.2 Selecting the drive mode

1. Push the selection lever (Fig. 10/
to the front until it audibly latches.
2. Turn the selection lever for the steer-
ing (Fig. 11/ ) in an anticlockwise
direction to the drive mode position.
Note:
To engage the steering mechanism,
align the steering wheels to point to
the front (Fig. 11) and then make
small steering and push movements!
3. Switching on the control unit. The
vehicle is now ready for driving
again.
Remark:
A lit-up brake symbol (Fig. 12/
indicates that the steering mecha-
nism is not yet engaged! Switch off
the control unit and then repeat
items 2. and 3..
)
1
10
2
)
11
3
o
( )
12
15