Headrest; Adjusting The Headrest; Maintenance; Cleaning - Ortopedia TOURING 926 Operating Manual

6.2 Headrest

The headrest in combination with the
Ergorpor backrest element (Fig. 66.1) is
non-twisting, height-adjustable and de-
tachable.
Attention:
!
We recommend the fitting of two
rear-view mirrors for driving with a
headrest.

6.2.1 Adjusting the headrest

The headrest can be detached or ad-
justed in height after the clamping
screw (Fig. 66.2/ ) has been slack-
ened.
Slacken the clamping screw (Fig. 66.3/
) and position the headrest at the
desired height. Tighten the clamping
screw (Fig. Tighten the clamping screw
(Fig. 66.3/ ).
Attention:
!
The maximum height adjustment is
indicated by the marking.
42
66.1
1
66.2
2
66.3

7. Maintenance

7.1 Cleaning

A regular cleaning of the electric wheel-
chair is necessary for your own safety and
the safety of others. We have however
been able to reduce the cleaning effort
to a minimum through the use of the
best and modern materials. Comply with
the following cleaning instructions at all
times, a regular cleaning will maintain
the operability and value of the electric
wheelchair.
Note:
The vehicle driver is responsible for
the correct functioning and safe con-
dition of the vehicle when driving on
public highways.
An incorrect or neglected cleaning and
maintenance results in a limitation of the
product liability.
Do not clean the electric wheelchair
with a high-pressure cleaner!
Keep water and moisture away from
electrical components and cables!
Clean painted and chromed parts
with commercially available paint-
work and chrome cleaners.
Plastic parts:
The plastic covers and similar parts are
manufactured from high-quality plastic.
Clean these only with a moist soft cloth
and commercially available plastic clean-
ers. Always observe the specific product
information.
43