Front Indicator; Removal; Fitting; Rear Indicator - Ortopedia TOURING 926 Operating Manual

7.7.2 Front indicator

Ball lamp:
24V/10W BA 15s
Tools: Phillips screwdriver
Note:
Use a dry cloth to hold the glass body
of the new filament bulb.

7.7.2.1 Removal:

– Switch off the control unit.
– Pull out the security plug and the
main fuse.
– Undo the securing screw and remove
the lens (Fig. 88).
– Press the defective spherical bulb
slightly inwards, turn it and then pull
it out of the bulb holder (Fig. 89).
Note:
The armrest (incl. the lighting unit)
can be detached for a filament bulb
replacement (see Armrest section).
52
88
89

7.7.2.2 Fitting:

– Insert a new ball lamp. Push the side
pins (bayonet catch) into the recesses
of the bulb holder (Fig. 89, hold the
glass body with a piece of cloth),
press lightly against the spring and
then turn the bulb until the bayonet
catch clicks into place (Fig. 88).
– Mount the lens. - First insert the top
pins, then press the lens downwards
and screw into place.

7.7.3 Rear indicator

Spherical bulb:
24V/21W BA 15s
Tool: Phillips screwdriver
Note:
Use a dry cloth to hold the glass body
of the new filament bulb.
7.7.3.1 Removal:
– Switch off the control unit.
– Pull out the security plug and the
main fuse.
– Undo the securing screws and re-
move the lens (Fig. 90).
– Press the defective spherical bulb
(Fig. 90/ ) slightly inwards against
the spring, turn it and then pull it
out of the bulb holder.
Note:
The armrest (incl. the lighting unit)
can be detached for a spherical bulb
replacement (see 'Armrest' section).

7.7.3.2 Fitting:

– Insert a new ball lamp. - Push the
side pins (bayonet catch) into the
recesses of the bulb holder, press
lightly against the spring and then
turn the bulb until the bayonet catch
clicks into place (Fig. 90/ ).
– Mount the lens. - Press in the lens
and fasten it with the securing screws
(Fig. 91).
1
90
91
53