Height Adjustment Of The Footplates; Height Adjustment Of The Calf Plates; Depth Adjustment Of The Calf Plates; Back Cushion - Ortopedia Varius Operating Manual

4.2.7 Height adjustment of the
footplates
After loosening the clamping screw (fig.
14/ ) depending on the model equip-
ment, the footplate fig. 14 and 13,1 can
be infinitely telescoped to the desired
height.
Remark:
Observe markings indicating maxi-
mum extension.
Tighten the clamping screw (fig. 14/
).
4.2.8 Height adjustment of the
calf plates
The calf plate can be adjusted in height
after the clamping screw (fig. 15/
has been slackened.
4.2.9 Depth adjustment of the
calf plates
The depth adjustment is effected by dis-
placing the securing screws (fig. 15/
16
1
14
2
)
1
15
).

4.3 Back cushion

For stowage/transport the back cushion
has to be removed (fig. 16).

4.3.1 ORTOform-back cushion

The ORTOform-back cushion is a firm,
removable cushion.
4.3.1.1 Removing the ORTOform-
back cushion
Push the safety bracket inward after loos-
ening the wing bolt (fig. 17).
Then remove the back cushion with lit-
tle pressure to the front (fig. 18).
4.3.1.2 Mounting the ORTOform-
back cushion
To secure the back cushion the safety
brackets are pushed outward and se-
cured by tightening the wing bolt (fig.
19).
16
17
18
19
17