Table of Contents
Advertisement
3.3.3.3 Armrest with double
locking
To install the armrest, push the diago-
nally positioned rear pin (Fig. 12/
into the corresponding opening, then
swivel it forwards into the correspond-
ing opening until you hear the locking
button click into place.
Note:
When the armrest is swivelled for-
ward, the rear lock (Fig. 12/
automatically engaged.
To remove the armrest, press the lock-
ing button (Fig. 13/
) swivel the front
of the armrest free and pull upwards.
Warning:
When supporting yourself on plastic
!
armrests, place your hands over the
central column (Fig. 13).
3.3.3.4 Height-adjustable arm-
rest
To adjust the height, push in the ratchet
button (Fig. 14/
) and bring the arm-
rest pad in stages to the desired height.
To adjust the armrest height on the
Impuls XX, push the ratchet button (Fig.
14.1/
).
26
)
1
12
) is
2
13
1
14
14.1
3.3.4 Leg supports
Warning:
Do not use the leg supports to lift or
!
carry the wheelchair.
• For the Impuls XX model with sepa-
rate leg supports, the maximum per-
missible user weight is reduced to 130
kg!
3.3.4.1 Calf support
The calf support (Fig. 15/
on to the retaining pin on the leg sup-
port. The calf support can be adjusted
to the required length using the Velcro
fastening on the rear side of the sup-
port.
3.3.4.2 Folding up the foot
plates
Locking the brakes prevents the wheel-
chair from unintentional movement.
Remove the calf support and lift both
feet from the foot plates.
To keep the foot area free, e.g. for "pro-
pelling" (moving the wheelchair for-
wards using the feet), the foot plates
should be folded to the side (Fig. 16).
1
15
) is pushed
16
17
1
27
Advertisement
Table of Contents
