Installation And Operation; Mounting The Transmitter Or Receiver; Connections; Transmitter Connections - Extron electronics DTP HDMI 301 User Manual

Installation and
Operation
This section describes the installation and the operation of the DTP HDMI 301 Tx/Rx
Extender, including:
•
•
•

Mounting the Transmitter or Receiver

CAUTION: Installation and service must be performed by authorized personnel only.
Mounting instructions and the applicable optional hardware can be found in the
"Reference
transmitter or receiver can be placed on a tabletop, mounted on a rack shelf, or mounted
under a desk or tabletop. The receiver can also be mounted on a projector bracket.

Connections

Transmitter Connections

.
Figure 2.
a
Mounting the Transmitter or Receiver
Connections
Operation
Information" section. The 1-inch high, quarter rack width DTP HDMI 301
DTP HDMI 301 Tx Rear Panel DTP HDMI 301 Tx Rear Panel
INPUTS
POWER
12V
AUDIO
0.6 A MAX
5 1 2
DTP HDMI 301 Tx Rear Panel Connectors
Input connector — Connect an HDMI cable between this port and the HDMI output
port of the digital video source.
NOTE:
See "HDMI connector" for pin assignments and to use the LockIt
Cable Lacing Bracket to secure the connector to the transmitter.
OUT
SIG LINK
RS-232 IR
DTP OUT Tx Rx Tx Rx
ANALOG AUDIO
4 3
DTP HDMI 301 • Installation and Operation
HDMI
®
3