Removing the shipping materials ______________
Remove the shipping materials as shown below.
Remove the shipping tapes from the top
1
of the fax.
Open the document tray
3
operation panel partially by gently
pulling it towards you (it only opens
slightly) w.
1
2
Open the printer cover using the printer
5
cover tab. (see p. 2-2)
2
q, then open the
4
6
Remove the protective piece from the
multi-purpose tray.
Remove the protective sheet from the
Automatic Document Feeder (ADF).
Close the operation panel by pressing it
down from the centre until it locks into
place.
Remove the shipping tape from the side
of the fax.
Close the printer cover and document
tray.
Unpacking
1
1-3