Table of Contents
Advertisement
Installing the BJ cartridge
The first time you set up your fax, you have to install the BJ cartridge before you can begin
receiving and copying documents.
For information on replacing the BJ cartridge, see p. 10-8.
Guidelines _____________________________________
Follow these guidelines to ensure optimum performance of your BJ cartridge.
• Use only a Canon BX-20 Black BJ cartridge in your fax.
• Store BJ cartridges at room temperature.
• Keep BJ cartridges in their packaging until you are ready to use them. This is to prevent the BJ
cartridge from drying out.
• Replace BJ cartridges after one year of use.
• Never remove the BJ cartridge unless you are going to replace it. When left exposed, the cartridge
print head dries out, making it unusable.
• To change a BJ cartridge, be sure to press [Cartridge] (on the operation panel) to move the
cartridge holder to the centre.
• Make sure the cartridge holder is in its home position (on the right side of the fax) when you are
not using the fax. If it is not in its home position, press [Cartridge]. Leaving the cartridge holder
out of its home position will cause the BJ cartridge to remain uncapped and dry out.
• Store BJ cartridges out of the reach of
c
children. If a child inadvertently ingests
ink, consult a physician immediately.
• Do not touch the precision components
on the BJ cartridge.
The ink in the BJ cartridge is difficult to clean up if spilled. Follow the precautions below when
handling the BJ cartridge.
• Carefully remove packaging from BJ cartridges.
• Do not attempt to disassemble or refill BJ cartridges.
• Do not shake or drop BJ cartridges or tip the print head downwards.
1-8
Do not touch this area.
Advertisement
Table of Contents
