Copying Problems; Telephone Problems - Canon EB15 User Manual

Hide thumbs Also See for EB15:
Table of Contents

Advertisement

Copying problems _____________________________

The fax will not make a copy.
The BJ cartridge may need to be replaced.
• Determine if the problem is with the BJ cartridge and replace if necessary. (see p. 10-8)
The document may not have been loaded correctly into the Automatic Document Feeder
(ADF).
• Remove the document, stack it if necessary, and load it into the ADF correctly. (see p. 3-3)
• Make sure the operation panel is closed.
The BJ cartridge may not be installed properly.
• Make sure the BJ cartridge is installed properly. (see p. 1-9)
The fax may not be operating properly.
• Print the nozzle check pattern. (see p. 10-7)
MEMORY FULL appears on the LCD when making multiple copies.
The fax's memory is full.
• Print or delete any documents stored in memory (see pp. 6-16, 6-17) to free up space in the
fax's memory, then start again.
The document you are copying may have too many graphics.
• If multiple pages are being copied, separate the pages into smaller stacks. If not, make the
desired number of copies one at a time as needed.
n
For additional troubleshooting, see Print quality problems, p. 10-17.

Telephone problems ___________________________

You cannot dial.
The telephone line may not be connected properly.
• Make sure all line connections are secure. (see pp. 1-5, 1-6)
The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-7).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
The fax may not be set for the type of telephone line in use (pulse/tone).
• Make sure the fax is set for the correct telephone line type. (see p. 1-14)
The handset, telephone, or extension phone disconnects while you are
talking.
The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-7).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
There is interference on the line.
A mobile phone or cordless phone may be in use near the fax.
• Make sure that mobile phones and cordless phones are not used near the fax.
10-16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb10Fax-eb15Fax-eb10

Table of Contents