Telecom Faxability (New Zealand Only); Setting The Fax Network - Canon EB15 User Manual

Telecom FaxAbility
(New Zealand only)
Telecom N.Z. offers the FaxAbility capability. If you subscribe to this service, your line is assigned
two numbers: one for fax and one for phone. When the fax number is called, the network sends a
specific ringing tone which your fax recognises and automatically handles as a fax call. If the phone
number is called, a different ringing tone is sent out from the network so that the call is handled as a
voice call. This means that there is no switching delay at the other party's end.
Contact Telecom for connection information.

Setting the fax network _______________________

Follow the procedure below to set the fax network.
1
Press [Function].
Press [Registration].
2
Press [Start/Copy].
3
Use [ 1] or [ 2] to select RX SETTINGS.
Press [Start/Copy].
4
Use [ 1] or [ 2] to select RX MODE.
Press [Start/Copy].
5
Use [ 1] or [ 2] to select NET SWITCH.
Press [Start/Copy].
6
Press [Stop].
Setting ends and the fax returns to standby mode.
7-16
Function
DATA REGSTRATION
Registration
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
NET SWITCH
INCOMING RING
Ex:
15:00 NET SW.