Table of Contents
Advertisement
What happens when Fax/Tel mode is selected
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting = 22 sec.)
Setting the options for Fax/Tel mode
If you set Fax/Tel mode, you can control precisely how the fax handles incoming calls by adjusting
the following settings:
• Adjust the time the fax takes to check whether a call is from a fax machine or a telephone (RING
START TIME setting).
• Adjust the length of time the fax rings when the call is a voice call (F/T RING TIME setting).
• Set whether the fax switches to receive mode after the ring time set in F/T RING TIME has
elapsed (DEFAULT ACTION setting).
7-6
Telephone
The fax answers without ringing.
The fax listens for the fax tone.
(For 8 sec.)
The fax tone is not detected.
The fax starts ringing.
If you don't pick up the handset
(Within 22 sec.).
DEFAULT ACTION
Choose between:
RECEIVE (Factory default setting) and DISCONNECT.
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a fax tone. For those cases if you set
the DEFAULT ACTION to RECEIVE, the fax switches to receive mode
automatically and starts receiving the document. If no document comes in, it
disconnects the call after approximately 40 seconds.
Fax
Sending document
manually
The fax tone
is detected.
Fax
Sending document
automatically
The document is
received automatically .
(The fax tone is
detected and the fax
switches to receive
mode.)
Pick up the
handset to talk.
DISCONNECT
The fax disconnects
the call.
Advertisement
Table of Contents
