Output Names; Outputs Scanning Sequences; Figure 15- Web Interface Output Names Page; Figure 16- Web Interface Scan Mode Page - Network Technologies VEEMUX SM-8X4-HDA Installation And Operation Manual

Veemux series audio/hd video matrix switch

Table of Contents

NTI AUDIO/HD VIDEO MATRIX SWITCH

Output Names

From the Administration menu, the Video or Audio Output

Names page can be displayed. (Selected separately from

the menu.) These pages enable the Administrator to

change the names of the output ports displayed on the

Switch page.

To change an Output Name, enter the

name of the port for the desired output port number, and

press "Save".

Note: Only the changes to the port

directly to the left of the Save button will

be saved. All other changes to ports

without pressing the port's respective

Save button will be discarded. All port

names must be no more than 16

characters in length and only

alphanumeric characters may be used.

The Outputs Scanning Sequences page displays the configuration of an automatic switching sequence from input (video source)

to input for each output (monitor).

The page displays:

output number being configured

the Scanning Sequence function status for that output

the Scan Mode status of each input (ON/OFF)

the length of time in seconds (dwell time) that each input will be viewed when connected

Table of Contents