End User Configuration; Table 7: Basic Settings Page - Grandstream Networks GXW400x User Manual

E U C
ND SER ONFIGURATION
The GXW FXS Series uses an imbedded web-browser to simply the configuration process. There are six
(6) screenshots that the end user should become familiar with during the configuration process.
Download these pages now
review the term definitions found in Tables 7 – 11.
T 7: B S
ABLE ASIC ETTINGS
End User Password
Web Port
Telnet Server
IP Address
DHCP hostname
DHCP domain
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Time Zone
Self Defined Time Zone
Grandstream Networks, Inc.
http://www.grandstream.com/user_manuals/GUI/GUI_GXW400x.rar
P D
AGE EFINITIONS
Password to access the Web Configuration Menu. This field is case sensitive with a
maximum length of 25 characters.
By default, HTTP uses port 80. This field is for customizable web port.
Default is Yes.
There are two modes to operate the GXW400x :
DHCP mode: all the field values for the Static IP mode are not used (even though they
are still saved in the Flash memory.) The GXW400x acquires its IP address from the first
DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The GXW400x will establish
a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address,
DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are set to zero by
default.
This option specifies the name of the client. This field is optional but may be required by
some Internet Service Providers. Default is blank.
This option specifies the domain name that client should use when resolving hostnames
via the Domain Name System. Default is blank.
Used by clients and servers to exchange vendor-specific information. Default is HT500.
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point
Protocol over Ethernet) connection.
PPPoE account password.
This field is optional. If your ISP uses a service name for the PPPoE connection, enter
the service name here. Default is blank.
Controls how the date/time is displayed according to the specified time zone.
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
It indicates a time zone with 6 hours offset with 1 hour ahead which is the US
central time.
It is positive (+) if the local time zone is west of the Prime Meridian and negative
(-) if it is east.
Prime Meridian (International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday etc)
The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of
March to the 1st Sunday of November.
GXW400x User Manual
Firmware 1.0.0.67
and
Page 19 of 35
Last Updated: 10/2007