End User Configuration - Grandstream Networks GXW-410x User Manual

E U C
ND SER ONFIGURATION
Once this HTTP request is entered and sent from a Web browser, the GXW-410x will respond with a login
screen. There are two default passwords for the login page:
F 4: S
IGURE CREEN
Password
After login, the next configuration page is the Basic Configuration page, explained in detail in Table 6:
Web Log-in Definition.
T 6: W
ABLE EB
Web Access
Web Port
End User Password
IP Address
Grandstream Networks, Inc.
VoIPon www.voipon.co.uk
User Level: Password:
End User Level 123
Administrator Level admin
- GXW-410 L
SHOT OF X OG
Grandstream Device Configuration
All Rights Reserved Grandstream Networks, Inc. 2005-2006
L - D (B
OG IN EFINITIONS ASIC
Select HTTP or secure HTTPS protocol for Web Access
By default, HTTP uses port 80 and HTTPS uses port 443. This field is for
customizable web port.
This contains the password to access the End User Web Configuration Menu
(Status and Basic Settings). This field is case sensitive with a maximum length
of 25 characters.
There are two modes to operate the GXW-410x:
DHCP mode: all the field values for the Static IP mode are not used (even
though they are still saved in the Flash memory.) The GXW-410x acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The GXW-410x will
establish a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields.
sales@voipon.co.uk
Webpages allowed:
Only Status and Basic Settings
All pages can be browsed.
- S
IN CREEN
Login
S P )
ETTINGS AGE
GXW-410x User Manual
Firmware 1.0.0.53
Tel: +44 (0)1245 808195
Page 13 of 37
Updated: 04/2007
Fax: +44 (0)1245 600030