Table 10: Fxs Ports Configuration - Grandstream Networks GXW400x User Manual

Analog ip gateway gxw400 series 4 or 8 fxs ports
Hide thumbs Also See for GXW400x:
Table of Contents

Advertisement

T
10: FXS P
C
ABLE
ORTS
FXS Port
FXS Port Number
SIP User ID
User account information, provided by VoIP service provider (ITSP). Usually in the form
of digit similar to phone number or actually a phone number.
Authenticate ID
SIP service subscriber's Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
Password
SIP service subscriber's account password for GXW400x to register to (SIP) servers of
ITSP.
Name
Any Name to identify this specific user.
Profile ID
Select the corresponding Profile ID (1/2)
Hunting Group
This feature enables the gateway to register all existing FXS ports with the same phone
number. Each incoming call will be routed to first available port in round robin mode.
User may configure all ports as members of the same Hunt Group or it may configure
different port combinations for more than one Hunt Group.
For example: Ports 1, 3 and 5 may be members of the same hunt group, the rest of the
ports may have separate numbers and may be reached independently.
Select appropriate value for Hunting Group feature. The original SIP account should be
set to Active while the group members should be set to the port number of the Active
Port.
Example configuration of a multiple hunt group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"
FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"
FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "7"
Hunt Group 1 contains ports 1, 2, 3. Hunt Group 4 contains ports 4, 5, 6. Hunt Group 7
contains ports 7, 8.
Grandstream Networks, Inc.
D
ONFIGURATION
EFINITIONS
GXW400x User Manual
Firmware 1.0.0.67
Page 25 of 35
Last Updated: 10/2007

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gxw4004Gxw4008

Table of Contents