Projecting With "Connect To A Network Projector; G5650W Only) - Epson EB-G5950 User Manual

Projecting with "Connect to a Network Projector" (EB-G5950/G5650W Only)
"Connect to a Network Projector" is a standard function in Windows Vista
and Windows 7. You can project images from the computer by detecting
the projector on the network only by using a function of the OS without
having to install any special software.
Windows Vista:Home Premium/Business/Enterprise/Ultimate
Windows 7:Professional/Ultimate
This section provides an easy explanation of "Connect to a Network
Projector".
Check that the projector and computer are connected to the network, and
carry out the following operations.
Procedure
A
Turn the projector on and switch the input source to LAN.
"Changing the Projected Image"
s
Compatible OS
p.27
B
On the computer, start Windows, and then click "Start" - "All
programs" - "Accessories" - "Connect to a Network Projector".
The connection setting screen is displayed.
The projector is identified by inputting its IP address, or by allowing
the OS to automatically identify all of the connected projectors.
C
Once the OS has identified all of the connected projectors,
select the one that you want to use and click "Connect".
When the projector password screen is displayed, enter the keyword
shown at the bottom of the LAN standby screen.
• You can connect only one projector to a computer.
q
• Audio is not transmitted. When outputting computer audio from the
projector, connect the computer's audio output port to the Audio1
input port, Audio2 input port, or Audio3 input port on the
projector using a commercially available audio cable. Set the LAN
Audio Input setting on the Settings menu to the port to which the
audio cable is connected. s
• When using Network Projector from Options in Windows Meeting
Space, set the colors for the computer screen you are using to the
highest level (32bit). If it is not capable of a 32bit display, a message
is displayed and you cannot connect.
124
p.59