Wireless Lan Menu - Epson EB-G5950 User Manual

Network Menu (EB-G5950/G5650W)

Wireless LAN Menu

To connect the projector to a computer using a wireless LAN, install the Wireless LAN unit (ELPAP03).
Sub Menu
Wireless LAN Power
Connection Mode
Wi-Fi Protected Setup
Channel
Wireless LAN system
SSID Auto Setting
SSID
Set this parameter to On when connecting the projector and a computer via a wireless LAN. If you do not want to connect via a wireless LAN, set this
parameter to Off to prevent unauthorized access by others.
Set the connection mode to use when connecting the projector and a computer via a wireless LAN. When using an Ad Hoc
mode is set to Quick. When using Infrastructure Mode
using EasyMP Multi PC Projection, set the connection mode to Advanced.
When using a WPS (Wi-Fi Protected Setup)
make security settings. s p.125
When connecting in Quick mode, you can select a channel that uses 802.11b/g. If interference from other signals occurs, use a different channel.
Sets the wireless LAN system. When connecting in Advanced mode, Auto can be set to automatically select a method that is suitable to the application
environment.
In an area that does not support 802.11a, only 802.11b/g is displayed.
When connecting in Quick mode, SSID Auto Setting can be set to On to enable finding this projector faster from among multiple projectors to make
connection more stable. The SSID will be created automatically, so the following address cannot be set.
Set this parameter to Off when connecting from one computer to multiple projectors.
Enter an SSID. When an SSID is provided for the wireless LAN system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
Function
g
, the connection mode is set to Advanced. When connecting the computer to the projector
g
compatible access point via a wireless LAN, you can easily connect the projector to the access point and
p.143
s
g
connection, the connection
70